Home Intro People Events Equipment Places Maps Books Photos Videos Other Reference FAQ About

World War II Database

CCKW file photo [11497]


CountryUnited States
ManufacturerGeneral Motors Corporation
Primary RoleTransport


ww2dbase"Amateurs talk about tactics, but professionals study logistics."
- Gen. Robert H. Barrow, USMC (Commandant of the Marine Corps) noted in 1980

ww2dbaseIn the study of the US Army logistics in Europe during WWII, the role of the two-and-a-half ton, 6-wheel drive transport truck cannot be understated. Called the "Deuce-and-a-Half" or just "Deuce," the overwhelming majority were GMC’s Model CCKW, known as the "Jimmy" by many. Trucks within the same set of US Army specifications were also manufactured by International Harvester, Studebaker, and REO, but twice as many CCKW’s were built as all of these others combined and hardly any of these others served with the US Army (some of the IH trucks served with the US Navy or USMC but most went along with the majority of the Studebaker’s & REO’s to the USSR via Lend-Lease).

ww2dbaseCCKW development began in 1939 when the US Army Quartermaster Corps issued specifications for a gasoline powered, all-wheel-drive truck with a two-and-a-half ton hauling capacity. The Army specified this size because they felt this was as big as they could go and still have the truck fit on Navy ships and also be well suited for mass production. GMC’s Yellow Coach and Truck Division submitted a design based largely on their pre-war truck models and this bid won the contract. After several preliminary variants, the CCKW in its final forms went into serious production in February 1941.

ww2dbaseThe designation CCKW comes from standard GMC terminology: C for a 1941 model year; C for a conventional cab configuration; K for selective front-wheel drive; and W for two powered rear axles.

ww2dbaseMass production began in 1940 with 8,000 made but in early 1941 production ramped up quickly, with over 500,000 CCKW’s produced by the time production wound down in mid-1945 (some authors place this number closer to 800,000 but this is not supported by GMC’s production figures). Between 1942 and 1943, CCKW production shifted from the all-metal closed cab of the civilian pre-war designs to the open top/canvas roof configuration. Several other more subtle adjustments were also made throughout production. While the canvas covered cargo bed was far and away the most common configuration, the CCKW also appeared as generator trucks, gasoline haulers, water tankers, dump trucks, and every other use imaginable on a truck. The basic chassis was also at the heart of several other successful designs, such as the AFKWX (cab-over design) and the DUKW (amphibian). About 10% of the CCKW’s were built with a short wheel base (19-inches shorter) and they were principally meant to tow artillery pieces.

ww2dbaseAssigned primarily to US Army supply units, these trucks were operated largely by African-American soldiers who distinguished themselves time and time again in this very unsung but vital function.

ww2dbaseBy mid-1944, the CCKW had already proven its worth to all the logisticians, but it was about to achieve legend status with the "Red Ball Express" (The term "Red Ball" was a railroad term meaning express shipping). Pre-invasion air raids had all but destroyed the railroads in Normandy, so after the D-Day landings only supplies by truck could feed the rapidly advancing armies. When allied forces broke out of Normandy in August 1944, they had yet to secure forward port facilities and supply lines became unbearably stretched. As the trucks were running farther and farther inland, congestion on the narrow French roads threatened to gridlock the convoys. Colonel Loren Albert Ayers drew on the experience of many US cities that improved traffic flow by using one-way streets. He reserved two routes between Cherbourg on the coast and the forward supply base in Chartres, France, over 200 miles inland. He designated the northern route strictly for eastbound convoys full of supplies and the southern route for westbound returning traffic. The system worked remarkably well. At its peak, the Red Ball Express operated nearly 6,000 vehicles and carried about 12,500 tons of supplies a day. With the taking of the port facilities in Antwerp, Belgium in November 1944, the long lines of supply trucks were no longer needed. The Red Ball Express ran for three months, moved about a million tons of supplies, and wore out 50,000 truck tires.

ww2dbaseWith so many CCKW’s in circulation by the end of the war, the truck remained in service in the US Army and its European allies for decades after its peak had passed. The vehicle remained a stellar logistics performer throughout the Cold War, even into the Korean Conflict, with some armies still using them well into the 1990’s. With many GMC CCKW’s in private hands still running today, the dependable truck was withdrawn from US Army service in 1956. CCKW’s legacy can still be seen, however, in every Chevrolet/GMC truck built since the war.

ww2dbaseSources: Bryce J. Sunderlin, Wikipedia, www.CCKW.org, Olive-Drab, Vehicles of Victory, Military Factory, wwiivehicles, Engines of the Red Army

Last Major Revision: Nov 2010


MachineryOne GMC 6-cylinder 269 cubic inch engine rated at 91.5hp
SuspensionWheels, 6x6
ArmamentOptional provision for machine gun mount
Length6.40 m
Width2.30 m
Height2.80 m
Weight5.2 t
Speed72 km/h
Range385 km


Early GMC CCKW 2 1/2-ton 6x6 closed cab long wheel base transport with winch, Pontiac, Michigan, United States, 1940GMC AFKWX 2 1/2-ton 6x6 transport truck, a predecessor to and cab-over version of the CCKW, date unknown
See all 86 photographs of CCKW Transport

Did you enjoy this article or find this article helpful? If so, please consider supporting us on Patreon. Even $1 per month will go a long way! Thank you.

Share this article with your friends:


Stay updated with WW2DB:

 RSS Feeds

Visitor Submitted Comments

1. tim petty says:
17 Aug 2011 09:40:47 PM

how many 1947.1 1/2 ton trucks were made? these were the trucks that still had the 1941-46 body style?
2. Commenter identity confirmed Alan Chanter says:
4 Apr 2022 10:30:18 AM

In early 1943 the Red Army adopted the Studebaker 6x6 as the standard vehicle to mount the BM-8 and BM-13 salvo rocket launchers. Almost 105,000 Studebaker vehicles were delivered to Russia by the end of the war, many of which were adapted to give the Katyusha a high degree of cross country mobility.

All visitor submitted comments are opinions of those making the submissions and do not reflect views of WW2DB.

Posting Your Comments on this Topic

Your Name
Your Email
 Your email will not be published
Comment Type
Your Comments


1. We hope that visitor conversations at WW2DB will be constructive and thought-provoking. Please refrain from using strong language. HTML tags are not allowed. Your IP address will be tracked even if you remain anonymous. WW2DB site administrators reserve the right to moderate, censor, and/or remove any comment. All comment submissions will become the property of WW2DB.

2. For inquiries about military records for members of the World War II armed forces, please see our FAQ.

Change View
Desktop View

Search WW2DB
CCKW Transport Photo Gallery
Early GMC CCKW 2 1/2-ton 6x6 closed cab long wheel base transport with winch, Pontiac, Michigan, United States, 1940GMC AFKWX 2 1/2-ton 6x6 transport truck, a predecessor to and cab-over version of the CCKW, date unknown
See all 86 photographs of CCKW Transport

Famous WW2 Quote
"The raising of that flag on Suribachi means a Marine Corps for the next 500 years."

James Forrestal, Secretary of the Navy, 23 Feb 1945

Support Us

Please consider supporting us on Patreon. Even $1 a month will go a long way. Thank you!

Or, please support us by purchasing some WW2DB merchandise at TeeSpring, Thank you!